27
2023
-
07
How to judge the brake pads of the motorcycle should be replaced?
To judge whether the brake pads of a motorcycle should be replaced, it should be judged from the following aspects: 1. Listen to the sound: If the brake is lightly tapped and accompanied by the sound of "iron rubbing iron" or a scream, the brake pads must be replaced immediately. Because the limit marks on both sides of the brake pad have directly rubbed the brake disc, it proves that the brake pad has exceeded the limit. 2. Look at the brake disc warning light: usually whether the brake disc warning light on the dashboard is on or not is used as the basis for judging whether the brake disc should be replaced. Generally, the indicator light is off. When the brake disc fails or is excessively worn, the light is on and goes out after repair. When the warning light is on, the brake disc has been worn to the limit, and the braking effect has been reduced, which greatly affects driving safety. 3. Look at the thickness of the brake disc: Most brake disc products have wear indicators, that is, 3 small pits are distributed on the disc surface. Measure the depth of the pit with a vernier caliper to be 1.5mm. In other words, when the total wear depth of the double-sided brake disc reaches 3mm wear and complete wear, it is recommended to replace the brake disc in time. 4. Brake response and stroke: When the brake pads become thinner, the brake response of the car will also become slow. It is necessary to step on the brakes deeper and harder to achieve the previous braking effect. When it is found that the braking effect is significantly weakened in the first half of the brake, the brake becomes soft, and the brake cannot be stopped, it is necessary to check whether the brake pads need to be replaced.
Previous Page
Previous Page
RELATED INFORMATION
